Greenwave Filters

Greenwave Filters

Do Air Fryers Use Radiation? Reading Greenwave Filters 10 minutes Next Earthing Rod

Most people are unaware of the dangers of dirty electricity lurking in their homes. Did you know that your home is probably full of appliances emitting dirty electricity? It is generated by unusable electromagnetic energy from various electronic devices in your home. However, this unused source of electromagnetic radiation can be eliminated by using dirty electricity filters.

There’s a wide variety of filters on the market, some work and some don’t. One type of product that is advertised as providing this protection is the Greenwave Filters. But do these filters really work? In this blog post, we’ll take a look at the science behind Greenwave filters and find out if they’re effective at EMF protection.

What is Dirty Electrical Energy?

Electrician giving a check to electricity cable box.

 

Dirty electricity, or electropollution, is unused energy that remains in electrical wiring. The recommended wiring system for virtually all buildings and homes in the US is 60 Hz AC, while Europe recommends 50 Hz electricity. Originally, electronic devices were designed to extract this amount of energy and there was no unused energy left in the wiring system.

However, modern electrical appliances are designed to draw more or less AC power. Consequently, they lead to inconsistent power consumption. Unused energy remains in the wiring system and emits harmful EMF radiation.

Some devices can’t rely on the standard 60 Hz and don’t perform well, so manufacturers manipulate how these devices use energy. This practice tends to interrupt the regular flow of current in the wiring system. Because these devices draw electricity, they create spikes and surges in the wiring system. These spikes and surges are commonly referred to as dirty electricity.

Electronic appliances such as your laptop charger, television, dimmer switches, and fluorescent lights require more or less power than the 120V provided by the wall outlet. These appliances have a rectifier and a transformer. The transformer alters the voltage of the device while the rectifier converts alternating current (AC) to direct current (DC). This disruption of the regular flow of electricity at the outlet creates dirty electricity in your home.

Dirty electricity contributes to high levels of electromagnetic radiation in the environment. So, to reduce your exposure, consider installing dirty electricity filters in your office or home.

What Do Dirty Electricity Filters Do?

Electricity Power Station

 

Dirty electricity filters turn dirty, unusable power into quality electricity for your home. They typically work by plugging into an outlet and then filtering the electricity. These filters do this by taking in the electrical current like any device, filtering it, before returning it to the power source.

A dirty electricity filter operates in a frequency range of 4 to 150 hertz, which studies have shown is the most harmful frequency range for the human body. This means less electromagnetic radiation in your home, which has many health benefits.

How Do We Measure Dirty Electricity?

There are several ways to measure the dirty electricity in your home and it’s a crucial step in knowing how much work you have to do to filter the dirty electricity and how effectively the filters are doing their job.

Get an AM Radio

AM Radio is among the easiest and cheapest ways to measure dirty electrical energy in your home. First, get a basic portable radio with a built-in speaker. Then turn the AM knob all the way to the left and you should land at 530 kilohertz. Turn up the volume on the speaker and go somewhere outdoors, like in your backyard. You should hear virtually very little or no static. Then go inside your house and hold the speaker close to the walls, you should hear a noticeable difference. The stronger and more intermittent the static electricity, the more likely you are to have problems with dirty electrical systems in your home.

Use Dirty Electricity Meters

Dirty electricity meters are the easiest and most accurate way to measure dirty electricity in your home, but it’s not the cheapest option. There are two (2) good ways to read dirty electricity, the Greenwave broadband EMI meter and the Graham-Stetzer meter.

GreenWave Broadband EMI Meter

The primary advantage of this meter is that it displays measurements in a commonly accepted way. It takes in a wide variety of frequencies, but filters out the regular 50/60 Hertz, which is not considered dirty electricity. This quantity is then displayed in millivolts (mV).

You should expect readings of about 300 mV or less with this meter, or if you are very sensitive to electromagnetic radiation, you’ll want it to be as low as possible. The GreenWave Broadband EMI Meter is very easy to use and really helps you know how good your dirty electricity filtering efforts are.

Graham–Stetzer meter

This meter uses a proprietary measurement of dirty electrical energy known as Graham-Stetzer (GS) units. The meter documentation says that ideally, you would see readings below 50, but this is nearly impossible to achieve even in homes with many dirty electrical filters.

Our recommendation would be to aim for readings anywhere below 300 GS. If you purchase this meter and see readings above about 1500 GS, you should really consider getting a dirty electricity filter system.

Greenwave Filters Review

Greenwave filters use their proprietary EMI (electromagnetic interference) filtering technology. EMI filtering filters harmonics (again, physics interpretation, not musical interpretation) and transient voltage electricity found in your home wiring.

The filters don’t affect the recommended 50/60 hertz current that should be present in the wiring system, but they do filter out all dirty electricity and, as the manufacturer put it, “short out” surges and spikes caused by modern electrical devices. But what makes the Greenwave Dirty Electricity Filter different from the rest?

The Greenwave Filters are quite easy to use. Simply plug a Greenwave filter into a power strip or outlet and you will instantly see what you are paying for. By using an EMI meter, you can get instant readings of up to 95% reduction in EMI levels.

The filters also have outputs. The Greenwave filter has an integrated outlet at the bottom, thus compensating for the occupied outlet slot. You can connect your electronic devices directly to a Greenwave filter with no special adapter required.

The Greenwave filters are certified safe. They meet UL safety standards. In addition, each Greenwave filter is free of toxic materials such as mercury, cadmium, lead, and others.

The manufacturer recommends strategically placing your filters throughout the house, which will differ depending on your requirements. They recommend up to two near a computer or TV and up to six close to your power input panel.

As you can see, this means that you need several Greenwave filters. Indeed, the manufacturer says you will need up to 20, but that depends on the size of your home and the scope of your problem.

Therefore, the installation of the Greenwave filters is very easy. What is not pleasant though, is the idea that you will need several of them in your home to filter out dirty electricity effectively because it’s going to cost you quite a lot of money.

Verdict Of Greenwave Filters Review

Overall, the Greenwave filter does a good job of filtering the electricity in your home. However, the Greenwave can be suffocated by high levels of dirty electricity, which is why the makers say you might require more than one in every location.

The bottom line is the Greenwave filter does an average job considering the price and the fact that you will require several to really enhance the electricity quality in your home. Considering the amount of money you will have to pay to get the system up and running, it is worth calculating the cost of the project and then researching alternatives.

Greenwave Filter Alternatives

The Geoclense Harmonizer is a better alternative to the Greenwave filter. This is why. The Geoclense is a healthy, negative charge resonance field generator designed to balance the noxious, unhealthy positive charge resonance created by dirty electricity and all forms of EMR, RF, Wi-Fi, Earth Radiation, and Bioplasmic Radiation.

When plugged into an outlet, it is said to neutralize the effects of harmful “dirty electricity” from the electricity grid and solar electricity systems, highly noxious smart meters (monitoring whether you are home or not, as well as your electricity usage), fluorescent lighting and the new compact fluorescent lights, electromagnetic radiation (EMR) and the electromagnetic field (EMF) from power or electricity lines up to 200 meters away, overhead power lines, electricity transformers and electricity substations, and many more.

The Geoclense Orgone Negative Ion Generator consistently generates healthy, beneficial Negative ions that work by harmoniously neutralizing your entire property and home all the way to its boundaries, counteracting each one of these destructive energies.

Unlike other dirty electricity filters which can only create imaginary energy balancing fields of 6 meters or less, Geoclense is designed to harmonize EMF radiation fields and the energy footprint from electrical devices, wiring, and power lines up to 200 meters from your property and earth magnetic grid lines up to 400 meters.

A single Geoclense Harmonizer is even powerful enough to harmonize interdimensional imprint radiation, personal beam imprints, and a multitude of other man-made disturbances up to 12 acres or for an entire 59-story building.

The fact that you need fewer units of GeoClense in your home shows that this is a more efficient product. Another area where the GeoClense Harmonizer wins is in price, being cheaper per unit than the Greenwave. Last but not least, the company offers discount packages for bulk orders like the Family Package and the Travel Package.

Overall, the GeoClense Harmonizer is a more powerful and efficient device that is much better at filtering out dirty electricity in your home. Easy to use and compliant with safety standards, it delivers considerable results almost immediately.

Final Thoughts

 

As we move towards more energy-efficient devices and other smart appliances, we are increasing our exposure to harmful radiation. These devices contribute to a higher level of electrosmog in our homes.

The dirty electricity that these devices emit can negatively affect our health, particularly if you are more vulnerable to the effects. Using dirty electrical energy filters will help regulate the voltage in your home and make the environment cleaner. Investing in a good filter not only reduces dirty electricity but also electromagnetic radiation.

Among the best dirty electricity filters is the GeoClense Harmonizer. It regulates the flow of electricity and reduces electrosmog pollution. Beyond that, it delivers excellent transmission force while neutralizing any EMF effects. The GeoClense Harmonizer does a good job of filtering dirty electricity in your home and is a great investment for your overall well-being.

Free shipping

Free worldwide shipping and returns